NETGEAR M6100 Series Reference Manual page 852

*> 24.14.8.0/24 100.10.1.1
Communities: no-export-subconfed
If you enter the command with the network/pfx-len option and without any additional
options, then the output format lists more information about the individual prefix. The best
path is always listed first, followed by any nonbest paths. The output only shows attributes
that are included with each path.
Parameter Description
Prefix/Prefix Length The destination prefix and prefix length.
Generation ID The version of the BGP routing table when this route last changed.
Forwarding Whether this BGP route is used for forwarding.
Advertised To The outbound update groups that this route is advertised to.
Update Groups
Local Preference The local preference, either as received from the peer or as set according to local policy.
AS Path The AS Path. This form of show ip bgp displays AS Paths as long as allowed by bgp maxas-limit.
Origin Value of the ORIGIN attribute.
Metric Value of the MED attribute, if included.
Type Whether the path is received from an internal or external peer.
IGP Cost The interior gateway cost (e.g., OSPF cost) to the BGP NEXT HOP.
Peer (Peer ID) The IP address of the peer that sent this route, and its router ID.
BGP Next Hop The BGP NEXT HOP attribute.
Atomic Aggregate If the ATOMIC AGGEGATE attribute is attached to the path.
Aggregator The AS number and router ID of the speaker that aggregated the route.
Communities The BGP communities attached to the path.
Originator If the ORIGINATOR attribute is attached to the path, the value of this attribute
Cluster List If the CLUSTER_LIST attribute is attached to the path, the sequence of cluster IDs in the cluster list.
Command example:
(R1) # show ip bgp 172.20.1.0/24
Prefix/Prefix Length....................... 172.20.1.0/24
Generation ID.............................. 2056
Forwarding................................. Yes
Advertised to Update Groups................ 1, 5
Best Path:
Local Preference........................... 100
M6100 Series Switches
10 100
Border Gateway Protocol Commands
852
20 10 i