Show Ip Bgp Route-Reflection - NETGEAR M6100 Series Reference Manual

Format
show ip bgp neighbors ip-address received-routes
Mode Privileged EXEC
Parameter Description
ip-address The IP address of a neighbor.
The command output displays the following information.
Parameter Description
Network Destination prefix
Next Hop The BGP NEXT HOP as advertised by the peer.
Metric The value of the Multi Exit Discriminator, if a MED is received from the peer.
Local Pref The local preference received from the peer.
Path The AS path as received from the peer
Origin The value of the Origin attribute as received from the peer
Command example:
(NETGEAR Switch) #show ip bgp neighbors 172.20.101.100 received-routes
local router ID is 20.1.1.1
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop
172.20.1.0/24 172.20.101.1
20.1.1.0/24 172.20.101.1

show ip bgp route-reflection

This command displays all global configuration related to IPv4 route reflection, including the
cluster ID and whether client-to-client route reflection is enabled, and lists all the neighbors
that are configured as route reflector clients.
If a route reflector client is configured with an outbound route map, the output warns that set
statements in the route map are ignored when reflecting routes to this client.
Format
show ip bgp route-reflection
Mode Privileged Exec
M6100 Series Switches
Metric Local Pref
10
Border Gateway Protocol Commands
862
Path Origin
100 20 10 i
100 20 ?