Show Fip-Snooping Sessions - NETGEAR M6100 Series Reference Manual

FC-MAP
Name-ID
Fabric-Name
Sessions
D-bit
Available for Login
Priority
FKA-ADV(FKA_ADV_PERIOD*5)
FCF Expiry Time
Time Elapsed

show fip-snooping sessions

Use the show fip-snooping sessions command in User EXEC or Privileged EXEC
mode to display information about the active FIP snooping sessions.
Note: This command can only be entered after FIP snooping is enabled
using the feature fip-snooping command. Otherwise, it does
not appear in the CLI syntax tree.
Format
show fip-snooping sessions [vlan vlan-id | interface interface-id | fcf
fcf-mac [enode enode-mac]] [detail]
Mode User EXEC
Privileged EXEC
Parameter Description
Interface-id ID of an interface on which FIP snooping has been enabled.
FCF-MAC MAC address of the FCF that is part of the session.
ENode-MAC MAC address of the ENode that is part of the session.
VLAN ID number of the VLAN that contains the session.
FCoE MAC Source MAC address of the FCoE packets that are originated by the ENode as part of the session.
FC-ID Fiber Channel ID of the virtual port that was created by the FCF when the ENode VN_Port did a
FLOGI/NPIV/FDISC request.
M6100 Series Switches
0e:fc:00
20:65:00:0d:ec:b1:9e:81
20:65:00:0d:ec:97:52:c1
3
0
1
2
250
219
0 days, 2 hours, 8 minutes
Data Center Commands
606