Redistribute (Bgp Router Config) - NETGEAR M6100 Series Reference Manual

Parameter Description
ipv6-address Network IPv6 prefixes.
prefix An IPv4 address prefix in dotted notation.
rm-name (Optional) A route map can be used to set path attributes on the route.
no network (IPv6 Address Family Config)
This command disables BGP from advertising an address prefix.
Format
no network ipv6-address/prefix-length [route-map rm-name]
Mode IPv6 Address Family Config

redistribute (BGP Router Config)

This command configures BGP to advertise routes learned by means outside of BGP. BGP
can redistribute local (connected), static, OSPF, and RIP routes.
The distribute-list out command can also be used to filter redistributed routes by prefix. Either
a redistribute route map or a distribute list may be configured, but not both.
A default route cannot be redistributed unless the
Config) command is given.
If a route map is configured, match as-path and match community terms are ignored. If no
route map is configured with the name given, no prefixes are redistributed.
Default BGP redistributes no routes by default. When BGP redistributes OSPF routes, it redistributes only
internal routes unless the match option specifies external routes.
Format
redistribute {ospf | rip | connected | static} [metric metric-value]
[match {internal | external 1 | external 2 | nssa-external 1 |
nssa-external 2}] [route-map map-tag]
Mode BGP Router Config
Parameter Description
ospf, rip, connected, A source of routes to redistribute.
static
metric (Optional) When this option is specified, BGP advertises the prefix with the Multi Exit Discriminator
path attribute set to the configured value. If this option is not specified, but a default metric is
metric-value
configured for BGP
the MED is set to the default metric. If a default metric is not configured, then the prefix is advertised
without a MED attribute.
M6100 Series Switches
default-information originate (BGP Router
(default-information originate (IPv6 Address Family Config)
Border Gateway Protocol Commands
839
command), then