Show Poe Card; Show Poe Mpsm - NETGEAR M6100 Series Reference Manual

show poe card

This command lists all the UPoE and PoE+ modules in the switch chassis. The host identifies
the main module into which the PoE or UPoE daughter card is plugged.
Format
show poe card [slot-id | all]
Mode Privileged EXEC
User EXEC
Command example:
(NETGEAR Switch) #show poe card all
Slot Model Description
---- ----- ----------
1 XCM89P ProSafe PoE+ D-Card
2 XCM89UP ProSafe UPoE D-Card

show poe mpsm

This command displays the Multi Protocol Service Module (MPSM) and power bank values.
Format
show poe mpsm [slot]
Mode Privileged EXEC
Command example:
(NETGEAR Switch) # show poe mpsm
Current Active MPSM = 1
Slot Power Bank
Value (W)
1
2
3
Command example:
(NETGEAR Switch) #show poe mpsm 2
Slot = 2
Current Active MPSM = 1
MPSM Number:
6 7
Power Bank Value (W):
Note: This command only applies when at least one module has PoE
capability
M6100 Series Switches
Host
------
XCM8944
XCM8948
580
610
550
0 1
260 610
Power over Ethernet Commands
1150
Status PoE FW Version
------- --------------
Running 1.0
Running 1.0
2 3
1080 1430 1780
4 5
2130 2480 2830