Show Ip Pim Ssm - NETGEAR M6100 Series Reference Manual

Interface Interface-Mode
--------- --------------
1/0/1 Enabled
1/0/3 Disabled
Command example:
The following example shows PIM Mode - Sparse
(NETGEAR) #show ip pim
PIM Mode Sparse
Interface Interface-Mode
--------- --------------
1/0/1 Enabled
1/0/3 Disabled
Command example:
The following example shows that PIM is not configured:
(NETGEAR) #show ip pim
PIM Mode None
None of the routing interfaces are enabled for PIM.

show ip pim ssm

This command displays the configured source specific IP multicast addresses.
Format
show ip pim ssm
Modes Privileged EXEC
User EXEC
Term
Group Address
Prefix Length
Command example:
(NETGEAR) #show ip pim ssm
Group Address/Prefix Length
----------------------------
232.0.0.0/8
M6100 Series Switches
Operational-Status
------------------
Operational
Non-Operational
Operational-Status
------------------
Operational
Non-Operational
Definition
The IP multicast address of the SSM group.
The network prefix length.
IP Multicast Commands
1090