Domain-Name (Ipv) - NETGEAR M6100 Series Reference Manual

If lifetime values are not configured, the default lifetime values for valid-lifetime and
preferred-lifetime are considered to be infinite.
Format
address prefix ipv6-prefix [lifetime {valid-lifetime preferred-lifetime |
infinite}]
Mode IPv6 DHCP Pool Config
Term Definition
lifetime (Optional) Sets a length of time for the hosts to remember router advertisements. If configured, both
valid and preferred lifetimes must be configured.
valid-lifetime The amount of time, in seconds, the prefix remains valid for the requesting router to use.
is from 60 through 4294967294. The
valid-lifetime
preferred-lifetime The amount of time, in seconds, that the prefix remains preferred for the requesting router to use.
The range is from 60 through 4294967294. The
exceed the
infinite An unlimited lifetime.
Command example:
The following example configures an IPv6 address prefix for the IPv6 configuration pool
pool1:
(NETGEAR Switch) #configure
(NETGEAR Switch) (Config)# ipv6 dhcp pool pool1
(NETGEAR Switch) (Config-dhcp6s-pool)# address prefix 2001::/64
(NETGEAR Switch) (Config-dhcp6s-pool)# exit
domain-name (IPv6)
This command sets the DNS domain name which is provided to DHCPv6 client by DHCPv6
server. DNS domain name is configured for stateless server support. Domain name consist of
no more than 31 alpha-numeric characters. DHCPv6 pool can have multiple number of
domain names with maximum of 8.
Format
domain-name dns-domain-name
Mode IPv6 DHCP Pool Config
no domain-name
This command removes dhcpv6 domain name from dhcpv6 pool.
Format
no domain-name dns-domain-name
Mode IPv6 DHCP Pool Config
M6100 Series Switches
value.
value.
valid-lifetime
IPv6 Commands
974
value cannot exceed the
preferred-lifetime
preferred-lifetime
The range
value cannot