Statistics Application Commands; Stats Group (Global Config) - NETGEAR M6100 Series Reference Manual

Falling Event: 2
Startup Alarm: Rising-Falling
Owner: MibBrowser

Statistics Application Commands

The statistics application gives you the ability to query for statistics on port utilization,
flow-based and packet reception on programmable time slots. The statistics application
collects the statistics at a configurable time range. You can specify the port number(s) or a
range of ports for statistics to be displayed. The configured time range applies to all ports.
Detailed statistics are collected between a specified time range in date and time format. You
can define the time range as having an absolute time entry and/or a periodic time. For
example, you can specify the statistics to be collected and displayed between 9:00 12 NOV
2011 (START) and 21:00 12 NOV 2012 (END) or schedule it on every Mon, Wed, and Fri
9:00 (START) to 21:00 (END).
You can receive the statistics in the following ways:
• User requests through the CLI for a set of counters.
• Configuring the device to display statistics using syslog or email alert. The syslog or email
alert messages are sent by the statistics application at END time.
You can configure the device to display statistics on the console. The collected statistics are
presented on the console at END time.

stats group (Global Config)

This command creates a new group with the specified id or name and configures the time
range and the reporting mechanism for that group.
Format
stats group group-id | name timerange time-range name reporting
list-of-reporting-methods
Mode Global Config
Parameter Description
group ID, name Name of the group of statistics or its identifier to apply on the interface. The range is:
•
•
•
•
•
•
•
The default is None.
M6100 Series Switches
1. received
2. received-errors
3. transmitted
4. transmitted-errors
5. received-transmitted
6. port-utilization
7. congestion
Utility Commands
314