Show Ip Bgp Neighbors Advertised-Routes - NETGEAR M6100 Series Reference Manual

Parameter Description
Invalid The AGGREGATOR attribute was invalid.
AGGREGATOR
attribute
Unrecognized An UPDATE message contained a path attribute with the Optional flag clear, but this router does not
well-known path recognize the attribute.
attribute
Missing mandatory An UPDATE message was received without a mandatory path attribute.
path attribute
Missing LOCAL An UPDATE message was received from an internal peer without the LOCAL PREF attribute.
PREF attribute
Invalid prefix in An UPDATE message received from this peer contained a syntactically incorrect prefix.
UPDATE NLRI
Command example:
In the following example, BGP has received an UPDATE message from an external peer
172.20.101.100 with something other than the peer's ASN as the first ASN in the AS Path.
The additional counter shows that this occurred one time.
(NETGEAR Switch) #show ip bgp neighbors 172.20.101.100
Remote Address ................................ 172.20.101.100
Remote AS ..................................... 101
...
Last Error .................................... UPDATE Message Error
Last SubError ................................. Malformed AS_PATH
Unexpected first ASN in AS path ............... 1
Established Transitions ....................... 1
Established Time .............................. 0 days 00 hrs 00 mins 10 secs

show ip bgp neighbors advertised-routes

This command displays the list of IPv4 routes advertised to a specific neighbor. These are
the routes in the adjacent RIB out for the neighbor's outbound update group.
Format
show ip bgp neighbors ip-address advertised-routes
Mode Privileged EXEC
Parameter Description
ip-address The IP address of a neighbor.
M6100 Series Switches
Border Gateway Protocol Commands
859