Show Ip Bgp Peer-List; Show Ip Bgp Policy Brief - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
LocalPref
AtomicAggr
AggrAS
Aggregator
CalcLocalPref
Communities
Best
Unknown
Attributes

14.8.74 show ip bgp peer-list

This command displays all the entries in the BGP4 Peer list.
Format
Modes
Peer Address

14.8.75 show ip bgp policy brief

This command displays the policy table for the BGP4 router.
Format
Mode
Index
Routing Commands
This field indicates the preference for an advertised route,
with higher values being preferred.
This field indicates whether the BGP4 router has selected the
less specific route or not.
This field indicates the AS number of the most recent BGP4
router which preformed route aggregation.
This field indicates the IP address of the most recent BGP4
router which performed route aggregation.
This field indicates the degree of preference calculated by the
receiving BGP4 router for an advertised route.
This field shows the associated community value for the
route exchanges.
This field indicates whether this route is considered the best
route from any routes that are available to choose from. If
only one route is available, it will be considered best. It will
show True / False.
This field indicates if there are any attributes in the received
update that are of an unknown type to this version of BGP.
Usually this field will contain "NONE". If there is a unknown
attribute, it will show the content of that field.
show ip bgp peer-list
Privileged EXEC
User EXEC
This is the IP Address of the Peer.
show ip bgp policy brief
Privileged EXEC
This displays the index of this entry in the policy table.
v1.0, December 2005
14-101