NETGEAR M6100 Series Reference Manual page 603

Hide thumbs Also See for M6100 Series:

Table of Contents

MAC address of the enode to display.

The command displays the following information.

Interface to which the ENode is connected.

ID number of the VLAN to which the ENode belongs.

Name of the ENode.

MAC address of the ENode.

Fiber channel ID number of the virtual port that was created by FCF when the ENode logged into the

Number of successful virtual connections established.

The command displays the following additional information when the optional argument is

Sessions Waiting

Number of virtual connections waiting for FCF acceptance.

Sessions Failed

Number of virtual sessions failed.

Max-FCoE-PDU

Maximum FCoE PDU size the ENode MAC intends to use for FCoE traffic. This is equivalent to the

maximum Ethernet frame payload the ENode intends to send.

Time elapsed

Time elapsed since first successful login session snooped from the ENode.

Command example:

The following output displays when you specify no optional argument:

(NETGEAR Switch)# show fip-snooping enode

----------------------------------------------------------------

Command example:

The following output displays when you specify the optional argument:

(NETGEAR Switch)# show fip-snooping enode 00:0c:29:65:82:bc

M6100 Series Switches

00:0c:29:65:82:bc

00:0d:31:23:53:11

Data Center Commands

Chapters

Table of Contents