Dot1X Supplicant User; Show Dot1X Statistics; Dot1X Supplicant Timeout Auth-Period - NETGEAR M6100 Series Reference Manual

no dot1x supplicant timeout held-period
This command sets the held-period value to the default value.
Format
no dot1x supplicant timeout held-period
Mode Interface Config

dot1x supplicant timeout auth-period

This command configures the authentication period timer interval to wait for the next EAP
request challenge from the authenticator. The interval can be in a range from 1–65535
seconds. The default is 30 seconds.
Default 30 seconds
Format
dot1x supplicant timeout auth-period seconds
Mode Interface Config
no dot1x supplicant timeout auth-period
This command sets the auth-period value to the default value.
Format
no dot1x supplicant timeout auth-period
Mode Interface Config

dot1x supplicant user

Use this command to map the given user to the port.
Format
dot1x supplicant user
Mode Interface Config

show dot1x statistics

This command displays the dot1x port statistics in detail.
Format
show dot1x statistics unit/slot/port
Mode Privileged EXEC
User EXEC
Term
EAPOL Frames Received
EAPOL Frames Transmitted
M6100 Series Switches
Definition
Displays the number of valid EAPOL frames received on the port.
Displays the number of EAPOL frames transmitted via the port.
Switching Commands
418