Ipv6 Dhcp Snooping Database; Ip Dhcp Snooping Database Write-Delay (Dhcpv); Ipv6 Dhcp Snooping Binding - NETGEAR M6100 Series Reference Manual

no ipv6 dhcp snooping verify mac-address
Use this command to disable verification of the source MAC address with the client hardware
address.
Format
no ipv6 dhcp snooping verify mac-address
Mode Global Config

ipv6 dhcp snooping database

Use this command to configure the persistent location of the DHCP Snooping database. This
can be local or a remote file on a given IP machine.
Default local
Format
ipv6 dhcp snooping database {local | tftp://hostIP/filename}
Mode Global Config
ip dhcp snooping database write-delay (DHCPv6)
Use this command to configure the interval in seconds at which the DHCP Snooping
database is persisted. For the seconds argument, the interval value is in a range from 15 to
86400 seconds.
Default 300 seconds
Format
ip dhcp snooping database write-delay seconds
Mode Global Config
no ip dhcp snooping database write-delay
Use this command to set the write delay value to the default value.
Format
no ip dhcp snooping database write-delay
Mode Global Config

ipv6 dhcp snooping binding

Use this command to configure static DHCP Snooping binding.
Format
ipv6 dhcp snooping binding mac-address vlan vlan-id ipaddress interface
interface-id
Mode Global Config
M6100 Series Switches
IPv6 Commands
984