Show Ip Igmp Groups - NETGEAR M6100 Series Reference Manual

Term Definition
IGMP Admin Mode The administrative status of IGMP. This is a configured value.
Interface
unit/slot/port
Interface Mode Indicates whether IGMP is enabled or disabled on the interface. This is a configured value.
Protocol State The current state of IGMP on this interface. Possible values are Operational or Non-Operational.

show ip igmp groups

This command displays the registered multicast groups on the interface.
The argument unit/slot/port corresponds to a physical routing interface or VLAN
routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN
ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter
is a number in the range of 1–4093.
If detail is specified this command displays the registered multicast groups on the interface
in detail.
Format
show ip igmp groups {unit/slot/port | vlan vland-id} [detail]
Mode Privileged EXEC
If you do not use the detail keyword, the following fields display.
Term Definition
IP Address The IP address of the interface participating in the multicast group.
Subnet Mask The subnet mask of the interface participating in the multicast group.
Interface Mode This displays whether IGMP is enabled or disabled on this interface.
The following fields are not displayed if the interface is not enabled.
Term Definition
Querier Status This displays whether the interface has IGMP in Querier mode or Non-Querier mode.
Groups The list of multicast groups that are registered on this interface.
If you use the detail keyword, the following fields display.
Term Definition
Multicast IP The IP address of the registered multicast group on this interface.
Address
Last Reporter The IP address of the source of the last membership report received for the specified multicast
group address on this interface.
M6100 Series Switches
IP Multicast Commands
1101