NETGEAR M6100 Series Reference Manual page 419

Term
EAPOL Start Frames Transmitted
EAPOL Logoff Frames Received
EAP Resp/ID Frames Received
EAP Response Frames Received
EAP Req/ID Frames Transmitted
EAP Req Frames Transmitted
Invalid EAPOL Frames Received
EAP Length Error Frames Received
Last EAPOL Frames Version
Last EAPOL Frames Source
Command example:
(NETGEAR Switch) #show dot1x statistics 0/1
Port........................................... 0/1
EAPOL Frames Received.......................... 0
EAPOL Frames Transmitted....................... 0
EAPOL Start Frames Transmitted................. 3
EAPOL Logoff Frames Received................... 0
EAP Resp/Id frames transmitted................. 0
EAP Response frames transmitted................ 0
EAP Req/Id frames transmitted.................. 0
EAP Req frames transmitted..................... 0
Invalid EAPOL frames received.................. 0
EAP length error frames received............... 0
Last EAPOL Frame Version....................... 0
Last EAPOL Frame Source........................ 00:00:00:00:02:01
M6100 Series Switches
Definition
Displays the number of EAPOL Start frames transmitted via the port.
Displays the number of EAPOL Log off frames that have been received on the
port.
Displays the number of EAP Respond ID frames that have been received on the
port.
Displays the number of valid EAP Respond frames received on the port.
Displays the number of EAP Requested ID frames transmitted via the port.
Displays the number of EAP Request frames transmitted via the port.
Displays the number of unrecognized EAPOL frames received on this port.
Displays the number of EAPOL frames with an invalid Packet Body Length
received on this port.
Displays the protocol version number attached to the most recently received
EAPOL frame.
Displays the source MAC Address attached to the most recently received
EAPOL frame.
Switching Commands
419