Logging Persistent; Show Exception - NETGEAR M6100 Series Reference Manual

show exception

Use this command to display the configuration parameters for generating a core dump file.
Default None
Format
show exception
Mode Privileged EXEC
Command example:
Protocol exception protocol configuration
TFTP Server Address
NFS Mount point
Core File name prefix
Hostname
Timestamp
Switch Chip Register Dump

logging persistent

Use this command to configure the Persistent logging for the switch. The severity level of
logging messages is specified at severity level. Possible values for severity level are
emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6),
or debug (7).
Default Disable
Format
logging persistent severitylevel
Mode Global Config
no logging persistent
Use this command to disable the persistent logging in the switch.
Format
no logging persistent
Mode Global Config
mbuf
Use this command to configure memory buffer (MBUF) threshold limits and generate
notifications when MBUF limits have been reached.
Format
mbuf {falling-threshold | rising threshold | severity}
Mode Global Config
M6100 Series Switches
TFTP server configuration
NFS mount point configuration
Core file prefix configuration.
Core file name contains hostname if enabled.
Core file name contains timestamp if enabled.
Switch chip register dump configuration
Utility Commands
268