Show Poe Port Configuration; Show Poe Port Info - NETGEAR M6100 Series Reference Manual

show poe port configuration

Use this command to see how the PoE ports are configured. You can display information
based on each individual port or all the ports collectively.
Format
show poe port configuration [port | all]
Mode Privileged EXEC
User EXEC
Command example:
(NETGEAR Switch) #show poe port configuration all
Admin
Intf Mode Priority
------ ------- -------- ------ -------------- ------------- ---------------------
0/1 Enable Low
0/2 Enable Low
Command example:
(NETGEAR Switch) #show poe port configuration 0/2
Admin
Intf Mode Priority
------ ------- -------- ------ -------------- ------------- ---------------------
0/2 Enable Low

show poe port info

Use this command to get information about the status of the PoE ports. You can display
information based on each individual port or all the ports collectively. The command displays
only PSE-capable ports.
Format
show poe port info [port | all]
Mode Privileged EXEC
User EXEC
M6100 Series Switches
Power Power Limit
Limit Type
(W)
15.400 User Defined
15.400 User Defined
Power Power Limit
Limit Type
(W)
15.400 User Defined
Power over Ethernet Commands
1151
High Power Detection
Mode Type
Disable Auto
Disable Auto
High Power Detection
Mode Type
Disable Auto