NETGEAR M6100 Series Reference Manual page 1163

Table 40. Protected Ports Log Messages (continued)
Component Message
Protected Ports Cannot update group YYY after deleting interface
XXX
Protected Ports Received an interface change callback while not
ready to receive it
Table 41. IP Subnet VLANS Log Messages
Component Message
IP subnet VLANs ERROR vlanIpSubnetSubnetValid:Invalid subnet This occurs when an invalid pair of subnet and
IP subnet VLANs IP Subnet Vlans: failed to save configuration
IP subnet VLANs vlanIpSubnetCnfgrInitPhase1Process: Unable to
create r/w lock for vlanIpSubnet
IP subnet VLANs vlanIpSubnetCnfgrInitPhase2Process: Unable to
register for VLAN change callback
IP subnet VLANs vlanIpSubnetCnfgrFiniPhase1Process: could not
delete avl semaphore
IP subnet VLANs vlanIpSubnetDtlVlanCreate: Failed
IP subnet VLANs vlanIpSubnetSubnetDeleteApply: Failed
IP subnet VLANs vlanIpSubnetVlanChangeCallback: Failed to add
an Entry
IP subnet VLANs vlanIpSubnetVlanChangeCallback: Failed to
delete an Entry
Table 42. Mac-based VLANs Log Messages
Component Message
MAC based VLANs MAC VLANs: Failed to save configuration
MAC based VLANs vlanMacCnfgrInitPhase1Process: Unable to
create r/w lock for vlanMac
MAC based VLANs Unable to register for VLAN change callback
M6100 Series Switches
NETGEAR Managed Switch Software Log Messages
1163
Cause
This message appears when an update group for
a interface deletion fails.
This appears when an interface change call back
has come before the protected port component is
ready.
Cause
netmask has come from the CLI.
This message appears when save configuration
of subnet vlans failed.
This appears when a read/write lock creations
fails.
This appears when this component unable to
register for vlan change notifications.
This appears when a semaphore deletion of this
component fails.
This appears when a dtl call fails to add an entry
into the table.
This appears when a dtl fails to delete an entry
from the table.
This appears when a dtl fails to add an entry for a
vlan add notify event.
This appears when a dtl fails to delete an entry
for an vlan delete notify event.
Cause
This message appears when save configuration
of Mac vlans failed.
This appears when a read/write lock creations
fails.
This appears when this component unable to
register for vlan change notifications.