Show Policy-Map Interface; Show Service-Policy - NETGEAR ProSafe M7100-24X User Manual

Term Definition
OperStatus
The current operational status of this DiffServ service interface.
Policy Name
The name of the policy attached to the interface in the indicated direction.

show policy-map interface

This command displays policy-oriented statistics information for the specified interface and
direction. The <unit/slot/port> parameter specifies a valid interface for the system.
Note: This command is only allowed while the DiffServ administrative
mode is enabled.
Format
show policy-map interface <unit/slot/port> [in | out]
Mode
Privileged EXEC
Term Definition
Interface
Valid slot and port number separated by forward slashes.
Direction
The traffic direction of this interface service.
Operational
The current operational status of this DiffServ service interface.
Status
Policy Name
The name of the policy attached to the interface in the indicated direction.
The following information is repeated for each class instance within this policy:
Term Definition
Class Name
The name of this class instance.
In Discarded
A count of the packets discarded for this class instance for any reason due to DiffServ
Packets
treatment of the traffic class.

show service-policy

This command displays a summary of policy-oriented statistics information for all interfaces in
the specified direction.
Format
show service-policy {in|out}
Mode
Privileged EXEC
ProSafe Managed Switch
Quality of Service (QoS) Commands
468