NETGEAR M6100 Series Reference Manual page 313

Term
High Capacity Alarm
Falling-Threshold
Absolute Value High
High Capacity Alarm
Falling-Threshold Value
Status
High Capacity Alarm
Rising Event Index
High Capacity Alarm
Falling Event Index
High Capacity Alarm
Failed Attempts
High Capacity Alarm
Owner
High Capacity Alarm
Storage Type
Command example:
(NETGEAR Switch) #show rmon hcalarms
Index OID
----------------------------------------------
1 alarmInterval.1
2 alarmInterval.1
Command example:
(NETGEAR Switch) #show rmon hcalarm 1
Alarm 1
----------
OID: alarmInterval.1
Last Sample Value: 1
Interval: 1
Sample Type: absolute
Startup Alarm: rising-falling
Rising Threshold High: 0
Rising Threshold Low: 1
Rising Threshold Status: Positive
Falling Threshold High: 0
Falling Threshold Low: 1
Falling Threshold Status: Positive
Rising Event: 1
M6100 Series Switches
Description
The upper 32 bits of the absolute value for threshold for the sampled statistic. The range is 0
to 4294967295. The default is 0.
This object indicates the sign of the data for the falling threshold, as defined by the objects
hcAlarmFallingThresAbsValueLow and hcAlarmFallingThresAbsValueHigh. Possible values
are valueNotAvailable, valuePositive, or valueNegative. The default is valuePositive.
The index of the eventEntry that is used when a rising threshold is crossed. The range is 1 to
65535. The default is 1.
The index of the eventEntry that is used when a falling threshold is crossed. The range is 1 to
65535. The default is 2.
The number of times the associated hcAlarmVariable instance was polled on behalf of thie
hcAlarmEntry (while in the active state) and the value was not available. This object is a
32-bit counter value that is read-only.
The owner string associated with the alarm entry. The default is monitorHCAlarm.
The type of non-volatile storage configured for this entry. This object is read-only. The default
is volatile.
Owner
MibBrowser
MibBrowser
Utility Commands
313