Search:mode - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

26
:SEARch Commands

:SEARch:MODE

Command Syntax
:SEARch:MODE <value>
<value> ::= {SERial1}
The :SEARch:MODE command selects the search mode.
The command is only valid when the :SEARch:STATe is ON.
Query Syntax
:SEARch:MODE?
The :SEARch:MODE? query returns the currently selected mode or OFF if
the :SEARch:STATe is OFF.
Return Format
<value><NL>
<value> ::= {SER1 | OFF}
See Also •
•
534
(see page 790)
Chapter 26, ":SEARch Commands," starting on page 531
":SEARch:STATe" on page 535
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide