Show Access-List Counter - Extreme Networks ExtremeWare XOS Command Reference Manual

Security Commands

show access-list counter

show access-list counter {<countername>} [any | ports <portlist> | vlan
<vlanname>] {ingress}
Description
Displays the specified access list counters.
Syntax Description
countername
portlist
vlanname
Default
The default direction is ingress.
Usage Guidelines
Use this command to display the ACL counters.
Example
The following example displays all the counters the ACL on port 2:1
show access-list counter port 2:1
The output of this command is similar to the following:
ACL/Counter Direction
============================================================
test ingress
counter1
counter2
counter3
counter4
counter5
counter6
History
This command was available in ExtremeWare XOS 10.1.
452
Specifies the ACL counter to display.
Specifies to display the counters on these ports.
Specifies to display the counters on the VLAN.
Packet Count
0
0
0
0
0
0
Byte Count
0
0
0
0
0
0
ExtremeWare XOS 11.0 Command Reference Guide