GARP Multicast Registration Protocol (GMRP) Commands
This chapter provides a detailed explanation of the GMRP commands. The commands are divided into
two functional groups:
•
•
The commands in this sections are:
•
•
•
•
•
•
gmrp adminmode
This command enables GARP Multicast Registration Protocol (GMRP) on the system. The default
value is disable.
gmrp adminmode enable
Syntax
Use no gmrp adminmode enable to disable GARP Multicast Registration Protocol (GMRP) on
the system.
Mode
Global Config
Command
Version 2.5.2
History
Version 2.5.1
Version 2.3
set gmrp adminmode
Command
Version 2.3
History
Show commands display switch settings, statistics, and other information.
Configuration commands configure features and options of the switch. For every configuration
command, there is a show command that displays the configuration setting.
gmrp adminmode on page 257
set gmrp adminmode on page 257
gmrp interfacemode enable all on page 258
set gmrp interfacemode all on page 259
show gmrp configuration on page 259
show mac-address-table gmrp on page 260
Unsupported: not tested in v.2.5.2
Unsupported: not tested in v.2.5.1
Changed from
Config mode from Privileged Exec mode
Changed to
set gmrp adminmode
gmrp
adminmode.
. Modified syntax and moved to Global
.
GARP Commands | 257