Multicast Features; Implementation Information; Enable Ip Multicast - Dell Force10 C150 Configuration Manual

Ftos configuration guide ftos 8.4.2.7 e-series terascale, c-series, s-series (s50/s25)

Hide thumbs Also See for Force10 C150:

Table of Contents

Multicast Features

Multicast is supported on the E-Series ExaScale platform with FTOS 8.1.1.0 and later.

This chapter contains the following sections:

Enable IP Multicast on page 663

Multicast with ECMP on page 664

Implementation Information on page 665

Multicast Policies on page 665

Multicast Traceroute on page 674

Multicast Quality of Service on page 675

Optimize the E-Series for Multicast Traffic on page 675

Tune the Central Scheduler for Multicast on page 676

FTOS supports the following multicast protocols:

PIM Sparse-Mode on page 755

PIM Dense-Mode on page 747

PIM Source-Specific Mode on page 777

Internet Group Management Protocol on page 403

Multicast Listener Discovery on page 605

Multicast Source Discovery Protocol on page 615

Multicast is not supported on secondary IP addresses.

are supported on platforms:

is supported on platforms

Multicast Features | 663

Show Quick Links

Table of Contents