Show Terminate-Code - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

show terminate-code

show terminate-code { application [ terminateReason | translationApplication ] |
Syntax
translationApplication [ terminateCode ] } [ filter ]
Command introduced in JUNOSe Release 7.3.0.
Release Information
Displays information about the current mappings of application terminate reasons
Description
to standards-based terminate codes.
Options
Privileged Exec
Mode
application Application; AAA, L2TP, PPP, or RADIUS client
terminateReason Reason that the subscriber's session was terminated
translationApplication Application whose terminate code is used for the mapping;
for example, RADIUS
terminateCode Code used by the translation application to identify the terminate
reason; for example, a RADIUS Acct-Terminate-Cause code
filter See Filtering show Commands on page 4
Chapter 7: S Commands
1155
show terminate-code