Monitoring Packet Mirroring Subscriber Information; Table 65: Show Mirror Subscribers Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Software for e series broadband services routers policy management configuration guide
Hide thumbs Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04:
Table of Contents

Advertisement

JunosE 11.3.x Policy Management Configuration Guide
Related
Documentation

Monitoring Packet Mirroring Subscriber Information

Purpose
Action
host1# show mirror subscribers
Subscriber ID
------------------
52:10:01:0E:12:4F:87:3A:61:67:65:6E:74:00:69:64
01:0D:61:74:6D:20:34:2F:32:3A:30:2E:31:30:31
02:0E:61:62:63:40:64:6F:6D:61:69:6E:2E:63:6F:6D
52:11:02:0F:12:4F:87:3A:72:65:6D:6F:74:65:00:69:64 dhcp-option-82
01:0D:61:74:6D:20:34:2F:32:3A:30:2E:31:30:35
02:0E:61:62:63:40:64:6F:6D:61:69:6E:2E:63:6F:6E
01:0E:63:69:64:40:64:6F:6D:61:69:6E:2E:63:6F:6D
Meaning
262
Table 64: show mirror rules Output Fields (continued)
Field Name
Secure Policy List
Sessions Mirrored
show mirror rules
Display CLI-based packet mirroring information about the subscribers for whom packet
mirroring is currently active. This command and the output are visible only to authorized
users—the mirror-enable command must be enabled before using this command.
To display information about subscribers for whom packet mirroring is active:
Mirror Subscribers:
Table 65 on page 262 lists show mirror subscribers command output fields.

Table 65: show mirror subscribers Output Fields

Field Name
Subscriber ID
Subscriber ID Method
Secure Policy Type
Secure Policy List
Sessions Mirrored
Field Description
Name of secure policy list used for packet mirroring
Number of sessions currently being mirrored
7 Total
ID
Secure
Method
PolicyType Policy Name
---------------
--------- -------------- --------
dhcp-option-82
IP
agent-circuit-id IPV6
agent-remote-id
IPV6
IP
agent-circuit-id IPV6
agent-remote-id
IPV6
agent-remote-id
L2TP
Field Description
Subscriber being mirrored
Method used to identify the subscriber
Type of secure policy; IP, IPv6, or L2TP
Name of secure policy list used for packet mirroring
Number of sessions being mirrored
Copyright © 2010, Juniper Networks, Inc.
Secure
Mirrored
Sessions
op82hex_pol
1
cidhex_poli
1
ridhex_poli
1
spl_88000002
1
spl_88000003
1
spl_88000004
1
l2tphex_pol
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 and is the answer not in the manual?

This manual is also suitable for:

Junose 11.3

Table of Contents