Mirror Disable - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

mirror disable

mirror disable triggerType triggerValue
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
nas-port-id added in JUNOSe Release 7.1.0.
Disables a packet mirroring session that was dynamically configured for a subscriber;
Description
uses the trigger information to identify the subscriber's session. There is no no
version.
Options
Privileged Exec
Mode
Related Topics
1306
mirror disable
triggerType One of the following RADIUS attributes that was used as the trigger
to start the packet mirroring session
acct-session-id Acct-Session-Id, RADIUS attribute [44]
calling-station-id Calling-Station-Id, RADIUS attribute [31]
ip-address Framed-IP-Address, RADIUS attribute [8]; associated with the
virtual router where the command is issued, RADIUS VSA [26-1]
nas-port-id NAS-Port-Id, RADIUS attribute [87]
username User-Name, RADIUS attribute [1]; associated with the virtual
router where the command is issued, RADIUS VSA [26-1]
triggerValue Value of the triggerType (the specified RADIUS attribute) that
identifies the subscriber
Configuring CLI-Based Mirroring
Configuring RADIUS-Based Mirroring