Metric-Style Wide - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

metric-style wide

[ no ] metric-style wide [ transition ] [ level-1 | level-2 | level-1-2 ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the router to generate and accept only new-style IS-IS TLVs with wider
Description
metric fields. If you issue this command, the value configured with the isis metric
command can range from 0–16777215. The no version restores the default value,
which is to generate and accept only old-style TLVs with narrow (six-bit) metric fields.
Options
Router Configuration
Mode
transition Configures the router to additionally accept old-style TLVs with narrow
(six-bit) metric fields
level-1 Configuration applies only to level 1 routing
level-2 Configuration applies only to level 2 routing
level-1-2 Configuration applies to both level 1 and level 2 routing
Chapter 13: M Commands
1301
metric-style wide