Maintenance-Association - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

maintenance-association

maintenance-association ma-name {
Syntax
}
Hierarchy Level [edit protocols oam ethernet connectivity-fault-management maintenance-domain
Statement introduced in JUNOS Release 8.4.
Release Information
Configure the name of the maintenance association in IEEE-compliant format.
Description
ma-name
Options
The remaining statements are explained separately.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1260
maintenance-association
short-name-format (character-string | vlan | 2octet | rfc-2685-vpn-id);
continuity-check {
hold-interval minutes;
interval (10m | 10s | 1m | 1s| 100ms);
loss-threshold number;
}
mep mep-id {
auto-discovery;
direction (up | down);
interface interface-name;
lowest-priority-defect (all-defects | err-xcon | mac-rem-err-xcon | no-defect | rem-err-xcon
|xcon );
priority number;
remote-mep mep-id {
action-profile profile-name;
}
}
domain-name]
—The name of the maintenance association within the maintenance domain.
Creating a Maintenance Association on page 708
Example: Configuring Connectivity Fault Management for a PBB Network on MX
Series Routers