Table of Contents
Advertisement
Settings – Public switched tel. networks
Voice over IP (VoIP)
function, the waiting time depends on their settings and cannot be
configured in the PBX.
Routing via exception numbers (VoIP + GSM)
Requirements:
•
Configured exception numbers (page Routing > VoIP and GSM
Routing > Exception numbers)
•
Enabled call forwarding method 2. B channel
The device checks whether the destination number involved in call
forwarding for external numbers has been set up as an exception number.
If so, the call is sent along the configured path. If the destination number has
not been entered in the routing table, the call to be forwarded is sent either
via a free call channel that is assigned to the port or via any free call channel
(For call forwarding via the PBX, use any available call channel
CALL FORWARDING UNCONDITIONAL (CFU)
Call forwarding available in exchange line
The exchange line has a CFU, therefore this function can be enabled.
The exchange line does not have a CFU, therefore this function must
be disabled.
532
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
).
Advertisement
Table of Contents
