Table of Contents
Advertisement
3001:00FF:ABC0:0EAC:0001:0000:0000:000F), IPv6 offers a greater
number of available IP addresses than version 4 of the Internet protocol
(IPv4).
disabled
Switches the use of IPv6 addresses off.
SLAAC
Automatically assigns an IPv6 address to the PBX.
static
Assigns a user-defined IPv6 address to the PBX.
Note: If IPv6 has been disabled for the PBX, IPv6 can also not be
enabled for any modules. If, in the reverse, IPv6 has been enabled for
the PBX, it is also enabled automatically for all modules and cannot be
disabled.
IPv6 settings
Requirements:
•
IPv6 status IPv6 static selected
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Administration
IP Configuration
995
Advertisement
Table of Contents
