Table of Contents
Advertisement
If an external caller is transferred to the automatic reception by a query
call from an internal phone, the person transferring them hears the
announcement and can then select the destination themselves. After
that, the caller is connected with the selected destination. If the person
transferring the calls hangs up before selecting a destination, the caller
hears the announcement and can select a destination themselves.
•
If the caller enters a valid number, the call destination will be called for
a maximum of 120 seconds. The destination subscriber can answer the
call during this time.
Notes:
When a call is transmitted via the automatic reception, it is the caller's
phone number that is transferred (not the reception's number).
If the call is not answered within 120 seconds, the announcement if the
destination is busy/does not reply is played. In this case, the call is then
either ended, the default destination is called, or the caller is recon-
nected to the automatic reception they previously called (depending on
the setting for the system "Reaction if the destination is busy or does not
reply").
If the destination number is busy, the call waiting function is enabled if
this function is enabled for the destination subscriber. If the destination
subscriber rejects call waiting, or if they have not enabled this function,
the announcement if the destination is busy/does not reply is played. In
this case, the call is then either ended, the default destination is called,
or the caller is reconnected to the automatic reception they previously
called (depending on the setting for the system "Reaction if the desti-
nation is busy or does not reply").
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Automatic Reception
45
Advertisement
Table of Contents
