Auerswald COMmander 6000 Advanced Information page 752

Settings – Devices
Door Terminals
Select a call duration during which a door call is to be signalled to an internal
subscriber.
Note: Set the call duration in the connected door terminal to the
maximum call duration. The actual call duration will then be limited by
the PBx.
Exchange line dialling / number presentation DDI
Proceed as follows:
• Separately for configurations
The option permits the precise selection of the external connection and even
of the phone number to be presented.
All ext. lines or internal: Door calls can be made on internal or on all
external channels.
External connection: Door calls will be made on the selected external
connection.
In the DDI entry field, enter the DDI to be presented from the extensions
block under the corresponding slot. If the DDI is displayed in red font subse-
quently, it either does not belong to the value range or the maximum number
of own phone numbers has already been entered.
Second ringer
Proceed as follows:
• Separately for configurations
752
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018