Table of Contents
Advertisement
Assigning the MAC address of the device
The MAC address of a phone is needed to identify a phone that is assigned
to a specific subscriber. For all transactions between phone and PBX the
PBX must be able to identify the MAC address of the phone so that the
phone can be matched to a subscriber and his/her provisioning data.
found devices
Select one of the existing MAC adresses.
assigned devices
MAC adresses already assigned to the subscribers.
manual assignement
Enter manually (only digits) or take over a MAC adress after reading with a
bar code scanner.
The MAC address of a device can be found as follows:
•
Retrieving from a client certificate sended by the phone
•
Reading with a bar code scanner enabled and connected to the
computer (e. g. via a USB interface)
•
Reading e. g. on the menu oft the phone or on a label
Note: If a MAC address has been entered and assigned to a subscriber,
the corresponding phone can already be provided with provisioning data
during its first boot process.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Subscriber (scr.)
Phone numbers
559
Advertisement
Table of Contents
