Table of Contents
Advertisement
Functions, Uses, Concepts
Remote Configuration and Alternative Connection Options
1. Start the COMfortel Set configuration software.
2. Open the menu Options > Interface....
3. In the Interface list field, select the ISDN card (CAPI 2.0) option.
4. Click OK.
5. Open the menu File > Open.
6. Click Phone.
7. Enter the remote switching number for system phones (including local
city code and exchange line access number), and click OK.
The Connection routes dialogue appears with the devices connected
via the configured interface.
8. If necessary, double-click the PBX symbol to display all the connected
system phones. Select the phone whose configuration you want to open
and click OK.
The PIN entry dialogue appears.
9. Select the desired authorisation from the Authorisation level list field.
10. Enter the associated PIN in the PIN entry field and click OK.
The configuration is loaded from the phone. This may take a while.
11. Make the desired changes.
Once you have configured all the changes to your satisfaction, first save
the configuration as described in the following as a file on the hard drive
and then in the phone.
12. Open the menu File > Save.
66
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
