Table of Contents
Advertisement
Configuring Call Forwarding on Busy (on an Internal Phone)
## 96
Own number
Own number
Destination
number
Additional infor-
mation
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
# * 67 *
Own phone number (number without exchange line
access number (unaffected by a direct exchange line
phone))
The 1st number can be omitted if call forwarding is to
be configured for the number currently sent by the
phone.
Internal or external number to be called
Internal number of the group or subscriber (for
exchange line request type Direct exchange line
phone: with preceding **)
or
External number (for exchange line request type
Internal phone: with preceding exchange line access
number)
Authorisation required
Authorisation for external destination required
The destination number may only be an external
number.
Permanent configuration is enabled.
Call Forwarding for External Numbers
Destination number
Short Reference
#
345
Advertisement
Table of Contents
