Table of Contents
Advertisement
Phoning
Query Calls
Initiating Query Call to Third Subscriber
If you want to connect a further communication partner during a query call,
you can initiate a third call for this purpose. Both the first and second
communication partner will be on hold in the background during this time.
Requirements:
•
Initiated query call
During a query call, proceed as follows:
1. Press the Flash key or the Query key.
2. Dial 5.
3. Enter a phone number. Possible entries:
Internal number of the individual phone
type Direct exchange line phone: with preceding **)
Internal number of the group
exchange line phone: with preceding **)
External number
preceding exchange line access number)
Short code number
line phone: with preceding **)
As soon as to the subscriber being called picks up the receiver, you will
make a third call.
270
(for exchange line request type Internal phone: with
(for exchange line request type Direct exchange
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
(for exchange line request
(for exchange line request type Direct
Advertisement
Table of Contents
