Table of Contents
Advertisement
Functions, Uses, Concepts
Configuration Switchover
For situations where your settings are supposed to apply even after config-
uration switchovers, you can use the so-called permanent configuration. If
permanent configuration is enabled, the configuration-dependent settings
will be overridden by the permanent configuration settings.
The following functions can use the permanent configuration:
•
Call forwarding of one's own external number (CF for MSNs, DDI
numbers, or additional numbers)
•
Readiness of the voice mail/fax boxes
Proceed as follows for configuration:
•
Creating sonfigurations.
– Using the Configuration Manager (page Time control > Configura-
tions)
•
Making settings configuration dependent.
– Using the Configuration Manager (on the following pages)
– Public switched tel. networks > Call distribution
– Public switched tel. networks > Call forwarding
– Subscriber (scr) > Profiles
– Devices > Voice mail/fax boxes > Profiles
– Devices > Door terminals
– Devices > Relays (Actuators)
– Routing > VoIP and GSM Routing > Routing is configuration
dependent
•
Switching the authorisation for configuration switching for the involved
internal phones on.
– Using the Configuration Manager (page Subscriber (scr) >
Properties > Authorisations)
116
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
