Table of Contents
Advertisement
Configuration Manager
Monitoring
By sending a ping to a remote host (e.g. computer, PBX) in the network, you
can check whether this host is reachable and how long the routing takes
(there and back).
External call channel assignment
Proceed as follows:
•
Using the Configuration Manager (
channel assignment)
The external call channel assignment shows the status of the call channels
(free, in use, not available), the emergency call ability and whether a GSM
gateway is connected to the external port.
Note:
When you open the page it first shows the status, which is automatically
updated every 30 seconds.
The status of a call channel is indicated by a coloured dot.
Call channel is being used.
Call channel is available.
Call channel has emergency call ability.
Call channel is not available.
Call channel does not have emergency call ability.
396
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Monitoring > External call
Advertisement
Table of Contents
