Table of Contents
Advertisement
Settings – Subscriber (scr.)
COMfortel DECT
Note:
Each IPUI may only be assigned one phone number.
If the base station has already been connected to the PBX and mobile
handsets have been logged into it, it is possible (after a short waiting
period) to view the list of ID numbers for these mobile handsets in the list
field and to then select a number by clicking it.
5. Select the mobile handset type in question in the list field under IPUI of
the handset / serial number of the handset.
Using the Configuration Manager to Log Out COMfortel DECT
900/900C Handsets
Proceed as follows:
•
Using the Configuration Manager
Requirements:
•
COMfortel DECT 900 Base connected to the internal S
•
COMfortel DECT 900/900C Handsets
•
Configured and assigned internal numbers for the COMfortel DECT
900/900C Handsets
1. Open the page Subscriber (scr.) > COMfortel DECT.
2. Select the DECT base in the list field under DECT base.
588
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
port
0
Advertisement
Table of Contents
