Auerswald COMmander 6000 Advanced Information page 664

Pbx for internet/isdn telephony

Hide thumbs Also See for COMmander 6000:

Table of Contents

Settings – Groups

group of the call order. In the first rotation the next member of the group of

the call order will be called immediately if a subscriber is busy. In the second

rotation the busy subscribers will hear knocking (only from external). The

order of the calls depends on the configured Priority: First of all the member

of the group first logged-in gets the position 1 in the order of calls, the

second one the position 2, ... . If position 1 takes a call, the second call will

be assigned to position 2. The member of the group with the position 1 will

get the last position in the order for a future call after he has finished the

current call.

Adding - fixed - Split Group

Here initially only one group members' phone is ringing. After the configured

delay time (after:) another single group member will be called. If the group

receives another call B initially the free group members will ring one after the

other (adding). If for the first call A less than half of the group members are

ringing more members are added to this call until exactly the half is reached.

If for the first call A more than half of the group members are ringing, no

members are added to this call (frozen). Only the remaining subscribers are

added to call B. If all group members are already ringing for call A, the group

is split for the calls. The order of calls depends on the configured Priority.

If a call was not accepted, although all logged-in members of the group were

called, the call would be finished with a busy signal.

Adding - balancing - Split Group