Call Waiting - Auerswald COMmander 6000 Advanced Information

Pbx for internet/isdn telephony

Hide thumbs Also See for COMmander 6000:

Table of Contents

Functions, Uses, Concepts

Call Waiting

If you are already in a call, the call waiting function notifies you using the call

waiting tone when another communication partner is calling.

Proceed as follows for configuration:

Switching call waiting function on.

– Using the Configuration Manager (page Subscriber (scr.) >

Properties > Reachability)

– Using a character string on the internal phone (see chapter Short

Reference > Call Waiting)

– Using the menu/function key on a system phone (optional, see the

phone manual)

Note: As of firmware 6.6 (PBX) and 2.4 (VoIP phone) a comparison

between phone and PBX will be implemented. This function can then be

switched on or off in the phone or the PBX.

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Commander 6000r