Table of Contents
Advertisement
Settings – Devices
Alarms
You can set the display text that will be displayed if an alarm call is made
to the internal subscribers, which have been selected as alarm
subscribers, here (page Functions > CLIP texts).
Exchange line dialling / number presentation DDI
---: Alarm calls can be made on all external channels.
External connection: alarm call is made on the selected external connection.
The selected phone number is transmitted.
Notes:
You must select the DDI number to be sent for a PTP connection from
the extensions block. If the DDI number is then displayed in red text,
either it is not in the value range, or the maximum number of external
phone numbers has already been entered.
Alarm calls should preferably be made via the land line.
Alarm delay time 0..99
Specifies how many seconds elapse, after the alarm is triggered on the
switch input, before the first alarm loop starts.
766
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
