Auerswald COMmander 6000 Advanced Information page 555

The default exchange line access number on the PBX is 0 in the factory
settings. However, this can be changed. Note that changing the
exchange line access number restricts the phone numbering plan.
The internal number entered here needs to be entered in the ISDN unit
or in the system phone as the (first) MSN. Also on an ISDN unit, make
sure that the phone number is transmitted to the PBX.
Name
Freely selectable name. This name is used to identify the subscriber within
the PBX and the connected system phones. The name can also be trans-
ferred to the VoIP end devices via LDAP server.
Module Port
Module and port to which the end device (e. g. phone) is connected.
Device type
Device type depending on the end device connected.
Analogue end devices:
• Phone
Analogue phone, analogue modem
• Answering machine
Analogue answering machine
• Fax machine
Analogue fax machine
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Subscriber (scr.)
Phone numbers
555