Lan Tapi; Settings Lan Tapi - Auerswald COMmander 6000 Advanced Information

Pbx for internet/isdn telephony

Hide thumbs Also See for COMmander 6000:

Table of Contents

Settings – Functions

LAN TAPI

Settings LAN TAPI (page 854)

Proceed as follows:

Using the Configuration Manager (page Functions > LAN TAPI)

Network port of the TAPI server (1024-65535)

Port on the PBX which is used for communications with the TAPI server.

Note: The new configuration will only become effective after the PBX or

the TAPI server has been restarted.

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Commander 6000r