Table of Contents
Advertisement
Settings – Devices
Alarms
If you do not want to use any of the existing relays, select New relay in the
list field (
cancels the operation). Enter a freely selectable name for the
relay and select the device as whose part the relay is to be created in the
Add to list field. Click Ok.
Note: The relay remains part of this other device (e. g. door terminal, IP
switch relay) in the configuration of the PBX, but takes over the selected
alarm function for the alarm.
For a detailed description of the operating modes, refer to the chapter
Functions > Relays (Actuators) > Relay Operating Modes.
Link to the page Devices > Relays (actuators)
Deletes the relay or opens the configuration of the relay.
Switch input
Requirements:
•
Switch input (optional, see chapter Technical Data in the Instructions)
762
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Advertisement
Table of Contents
