Table of Contents
Advertisement
when modifying the port (e. g. http://192.168.55.13:8081). A change of the
port should be made for security reasons especially if the PBX has to be
accessible from the Internet (via a router and a fixed IP address).
You can view the ports already configured on the Overview > Ports page.
Caution: A port change will be made out of security reasons
especially if the PBX has to be reachable from the Internet
(via router and fixed IP address).
Change the webserver port by entering another port number (port) with the
range
1
to 65535.
HTTPS port of the webserver
Port 443 is used for accessing the web server by default. The address can
thus be entered as follows: http://192.168.55.13, for example. Only when
accessing via Ethernet the value (e. g. 4432 instead of 443) has to be
entered when modifying the port (e. g. https://192.168.55.13:8081). A
change of the port should be made for security reasons especially if the PBX
has to be accessible from the Internet (via a router and a fixed IP address).
You can view the ports already configured on the Overview > Ports page.
Caution: A port change will be made out of security reasons
especially if the PBX has to be reachable from the Internet
(via router and fixed IP address).
Change the webserver port by entering another port number (port) in the
range
1
to 65535.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Administration
IP Configuration
991
Advertisement
Table of Contents
