Unsuccessful Outgoing Calls; Initiating Internal Callback On Busy - Auerswald COMmander 6000 Advanced Information

Unsuccessful Outgoing Calls

The following options are available for unsuccessful calls:
• Initiating Internal Callback on Busy (page 255)
• Initiating External Callback on Busy (page 257)
• Initiating Reservation of Exchange Line on Busy (page 260)
• Initiating Internal Callback on No Response (page 261)
• Initiating External Callback on No Response (page 262)
• Initiating Priority Call for Do-Not-Disturb (page 264)

Initiating Internal Callback on Busy

If you cannot get through to a busy subscriber despite repeated attempts,
you can initiate a callback on busy.
If you have initiated a callback, as soon as the other subscriber has hung up
the receiver to end the call, the PBX calls you. If you then pick up the
receiver, the other subscriber will be called. If the other subscriber picks up
the receiver, the connection for the call will be established. This deletes the
callback procedure in the PBX.
Important:
On system phones, this function is called via the menu/phone app
(optional, see manual for the phone).
To use this function at ISDN phones or to delete it again, this function
must be supported via a function key or via the menu by the respective
phone (optional, see manual for the phone).
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Phoning
Unsuccessful Outgoing Calls
255