Auerswald COMmander 6000 Advanced Information page 142

Functions, Uses, Concepts
Preliminary Pickup Query and Monitoring
Monitoring of other subscribers on the same PBX depends on the end
device (see manual for the end device).
Proceed as follows for configuration:
• Switching preliminary pick-up query and monitoring on.
– Using the Configuration Manager (on the following pages)
– For subscribers: Subscriber (scr.) >Properties > Settings
– For groups: Groups > Properties > Settings
• Configuring preliminary pick-up query and monitoring configuration
dependent.
– Using the Configuration Manager (on the following pages)
– For subscribers: Subscriber (scr.) >Profiles > ... > Settings
– For groups: Groups > Profiles > ... > Settings
142
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018