Note: The destination subscriber needs a sufficient exchange line
authorisation for taking external calls.
•
Switching call forwarding on.
– Using the Configuration Manager (page Subscriber (scr.) >
Properties > Reachability)
– Using a character string on the internal phone (see chapter Short
Reference > Call Forwarding for Subscribers)
– Using the menu/function key on a system phone (optional, see the
phone manual)
– Using the menu/T-Net function key on an analogue T-Net phone
(optional, see the phone manual)
•
Making additional settings for call forwarding.
– Using the Configuration Manager (page Subscriber (scr.) >
Properties > Reachability)
•
Configuring the call forwarding configuration dependent.
– Using the Configuration Manager (page Subscriber (scr.) >Profiles
> ... > Reachability)
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Call Forwarding
165